A roll-off dumpster rental is straightforward. A container is dropped at your property, you fill it, and we haul it away when the job is done. No trips to a sorting facility. No runs to the transfer station.
Fort Pierce Dumpster Company serves Fort Pierce and the broader St. Lucie County area with residential, commercial, and contractor rentals. This page covers all of it.
The calls we get come from homeowners clearing storm debris or getting ready for a move, remodelers pulling up flooring or tearing off a roof, contractors running an active construction or demolition site, and property managers handling foreclosure or estate cleanouts. If the job generates debris that needs to go somewhere, a roll-off container rental is usually the cleanest way to handle it.
When you call, the quote you hear packages delivery, a set rental period, pickup, and a stated weight allowance into one figure. That is what gets confirmed before anything is scheduled.
A few things move the price. Heavier material, concrete, roofing shingles, and dirt, triggers higher disposal costs because the transfer station charges by the ton. Larger containers cost more than smaller ones.
What can change the total after the fact: going over the included weight allowance, extending the rental period beyond what was agreed, or adding a prohibited item that requires separate handling. None of these are surprises if you know about them going in. We explain all of it on the call.
To get a real figure, call, describe the job and the material, and get the rate confirmed before scheduling. The price is set before anything is scheduled, and you know what it covers. That is the whole process.
Good service isn't complicated, it's just reliable. Start with the job, not the container list, and the right size becomes obvious.
For lighter residential work, a single-room cleanout, a garage purge, or a small landscaping job, the compact end of the range handles it. A 10-yard holds around 3 pickup-truck loads worth of debris, which is enough for most one-room or garage cleanouts without wasting space or money. A 12-yard holds around 4 pickup-truck loads worth of debris and gives a little more room when the garage has been accumulating for years.
Mid-range projects generate more volume. A bathroom or kitchen remodel, flooring removal across several rooms, or a roofing tear-off on a standard Fort Pierce home typically needs more capacity. A 15-yard holds around 5 pickup-truck loads worth of debris. A 20-yard holds around 7 pickup-truck loads worth of debris. These two sizes cover the majority of renovation and remodel work in the area.
For full home cleanouts, estate or hoarding cleanouts, land clearing, and active construction sites, the heavy end of the range is the right call. A 30-yard holds around 10 pickup-truck loads worth of debris. A 40-yard holds around 13 pickup-truck loads worth of debris. These sizes handle volume and keep the site moving without constant swap-outs.
One additional option worth knowing: for dense, heavy material like concrete, dirt, or masonry, weight capacity matters more than volume. The lowboy variant is sized for that load profile specifically. If the job is mostly heavy material, mention it on the call and we can confirm whether the lowboy is the better fit. Let us take care of the rest.
Every project is different, but the customer who sorts before delivery fills the container more efficiently and avoids a problem item mid-job.
Most renovation and household debris goes in without issue: furniture, appliances (check on refrigerant-containing units), yard waste, construction debris, drywall, lumber, flooring, roofing shingles, and non-hazardous renovation waste are all standard.
What cannot go in: hazardous materials including paint, solvents, motor oil, asbestos-containing material, batteries, propane tanks, and electronics. These require separate disposal routes.
If you are not sure about a specific item, call ahead and ask. Some materials have dedicated drop-off programs in St. Lucie County. Others require a licensed handler. Identifying them before the container arrives prevents a haul-back charge or a delayed pickup. It is that simple.
Getting a container onto a tight street takes knowing the street. The roll-off truck needs overhead clearance from wires, tree branches, and overhangs, plus enough straight-line approach to set the container down cleanly. Older Fort Pierce neighborhoods with narrow driveways or mature tree canopy can limit placement options, so it is worth thinking through the spot before delivery day.
Surface matters too. A paved driveway is the standard. Soft ground, grass, or gravel can shift under the container weight. Boards placed under the container distribute the load and reduce surface damage if the ground is anything other than solid sidewalk.
If the container needs to sit in the public right-of-way rather than on private property, permit requirements may apply. Whether a permit is needed depends on the specific address and jurisdiction. Confirm this on the call before delivery so nothing delays the placement.
For construction crews and weekend warriors alike, the work in Fort Pierce and St. Lucie County covers a wide range.
Post-storm cleanups and hurricane debris removal are a regular part of the schedule here. So are roofing replacements on older homes, estate and foreclosure cleanouts in established neighborhoods, and renovation work on properties being brought up to current code.
On the residential side: home cleanouts, moving cleanouts, garage and attic purges, yard waste and landscaping debris, and bathroom or kitchen remodels all fit the same service.
Contractors and commercial customers use roll-off containers for construction sites, demolition debris, commercial property cleanouts, and land clearing. If you run multiple jobs in the area, contractor accounts and multi-job arrangements can be set up for ongoing work so you are not booking each container as a separate one-off order.
Property managers handling foreclosure cleanouts, estate sale cleanouts, or recurring service between tenants can work out the volume, scheduling cadence, and swap-out logistics on the call. We handle recurring and multi-job customers differently from a single rental, and the details are straightforward once we know what the rotation looks like.
Scheduling a delivery is simple. Availability depends on what is already on the schedule for the area, so calling with a clear picture of the job, the address, the container size needed, and a preferred window gives the best chance of an early placement.
Short-notice requests are taken when the schedule allows. We handle last-minute and urgent requests, but the earlier the call, the more options are open. Prompt response, even for last-minute requests, is part of how we operate.
A drop is easiest to place when there is a straightforward driveway, no permit requirement, a size that fits the current schedule, and some flexibility on the exact window. A street placement requiring a permit, an unusual access situation, or a very specific time requirement adds steps that take a little more coordination.
Rental periods are flexible, and extensions are available. If the job is running longer than expected, communicate early and we work out what the schedule allows.
A 15-yard, which holds around 5 pickup-truck loads worth of debris, covers most single-room kitchen or bathroom remodels. If the job involves cabinet removal, tile, flooring, and drywall together, a 20-yard gives more room without risking an overfill.
Yes. Large demolition jobs, full home cleanouts, or active construction sites sometimes need multiple containers running at the same time or in sequence. Call and describe the project scope and we work out the configuration.
A 30-yard holds around 10 pickup-truck loads worth of debris and handles most large demolition phases. A full whole-house demolition or a large new build often calls for a 40-yard, which holds around 13 pickup-truck loads worth of debris, or multiple containers on rotation.
Permit requirements depend on the jurisdiction and the specific address. We confirm what applies before delivery, but pulling any required permit is typically the customer's responsibility. Ask on the call and we will tell you what we know about your address.
A standard container placed on a paved driveway can leave marks, especially on softer or freshly sealed surfaces. Placing boards or plywood under the container feet distributes the weight and reduces surface contact damage.
Driveway protection materials are not provided as part of the rental. Sourcing boards or plywood before delivery is the customer's responsibility, and it is worth doing if the surface is sealed, stamped, or anything other than solid poured concrete.
Roll-off delivery requires clear overhead access along the approach and at the drop point. Low-hanging branches, utility lines, or overhangs that cross the path can prevent a clean placement. Walk the spot before the delivery date and flag anything that looks close.
A street placement may require a permit from the city or county depending on the address and jurisdiction. We confirm the requirement before delivery, but the customer is responsible for obtaining any permit that applies. Placement in the right of way also needs to be clear of traffic lanes and utility access points.
A sloped surface affects how the container sits and whether it is stable once placed. Mention the slope when you call so placement options can be worked through before the delivery date.
Each container size comes with a weight allowance that is stated on the call. Going over that allowance triggers an overage charge based on the actual weight at the transfer station. Heavy material like concrete, dirt, and roofing shingles adds up faster than most customers expect, so confirming the weight allowance for your debris type before loading is worth doing.
Describe the job, confirm the size and the rental period, get the price, and schedule delivery. We handle the rest.
You'll talk to someone who knows the local dump and transfer stations. The price is confirmed before anything is scheduled, and flexible rental periods with no pressure to rush mean the container stays until the work is done.
Call (772) 297-9956 for a free quote.
Local knowledge. Right-sized containers. Pricing set out up front.
Choosing the right container size keeps the job moving and avoids the cost of swapping out mid-project. Rentals run from a compact 10-yard up to a 40-yard, with a lowboy option for dense, heavy material like concrete and masonry. Call us and describe the job, and we will confirm which size fits the debris type and the space available at your property.
| Size | Dimensions (L x W x H) | Approximate Capacity | Weight Allowance | Common Uses |
|---|---|---|---|---|
| 10-Yard | 12' x 8' x 3.5' | 10 cubic yards, around 3 pickup-truck loads worth of debris | 1 to 2 tons included |
|
| 10-Yard Lowboy | 12' x 8' x 2' | 10 cubic yards, built for dense heavy material rather than volume | Up to 4 tons included |
|
| 12-Yard | 14' x 8' x 3.5' | 12 cubic yards, around 4 pickup-truck loads worth of debris | 1.5 to 2 tons included |
|
| 15-Yard | 16' x 8' x 4' | 15 cubic yards, around 5 pickup-truck loads worth of debris | 2 to 2.5 tons included |
|
| 20-Yard | 22' x 8' x 4.5' | 20 cubic yards, around 7 pickup-truck loads worth of debris | 2.5 to 3 tons included |
|
| 30-Yard | 22' x 8' x 6' | 30 cubic yards, around 10 pickup-truck loads worth of debris | 3 to 4 tons included |
|
| 40-Yard | 22' x 8' x 8' | 40 cubic yards, around 13 pickup-truck loads worth of debris | 4 to 5 tons included |
|
How do I estimate the right container size based on the type of debris I have?
Debris type affects both volume and weight, and the two do not always move together. Light material like furniture, drywall, and yard waste fills a container fast but stays well within weight limits. Dense material like concrete, tile, and roofing shingles adds weight quickly without taking up much space. When you call, describe what is coming out and roughly how much of it there is, and we will confirm which size fits both the volume and the weight profile of the job.
What materials count as heavy debris that would need a lowboy instead of a standard container?
Concrete, brick, block, dirt, gravel, and masonry are the main ones. These materials are dense enough that a standard container can hit its weight limit well before it looks full. The lowboy is built with a lower profile and a higher weight allowance specifically for these loads. If the job is mostly heavy material, mention that on the call and we will confirm whether the lowboy is the right fit.
Rate Confirmed Before the Drop-Off
The price is set on the call before delivery is scheduled. You know the rental period, the weight allowance, and the total before anything is arranged.
What is the fill line, and why does it matter?
Every container has a fill line marked at the top rail. Material loaded above that line cannot be transported legally on public roads. An overfilled container will not be picked up until the load is brought down to the line, which delays the job and may add handling charges. Load the heaviest material first and keep the pile level as you go, stopping at the marked line.
What items are prohibited from going in the container?
Hazardous materials cannot go in. That includes paint, solvents, motor oil, gasoline, asbestos-containing material, propane tanks, batteries, and electronics. Refrigerant-containing appliances like refrigerators and air conditioners require separate handling. If you are not sure about a specific item, call before it goes in. St. Lucie County has dedicated drop-off programs for some of these materials, and we can point you in the right direction.
What does the quoted price include, and what can change the total?
The price confirmed on the call covers delivery, the agreed rental period, pickup, and a stated weight allowance. What can change the total after the fact: going over the included weight allowance, extending the rental beyond the agreed period, or adding a prohibited item that requires separate handling. We explain all of this on the call before anything is scheduled, so you know what the allowance covers and where the overage thresholds are.
Honest Advice on the Right Size
We help match the container to the debris type and the volume of the job. Describe what is coming out and we will tell you which size makes sense.
How does extending a rental work, and what does it cost?
If the job is running longer than expected, contact us before the scheduled pickup date. Extensions are available depending on what the schedule allows. The cost of extra days is confirmed when you request the extension. Reaching out early gives the most flexibility, since the schedule fills from the front.
How should I prepare the placement spot before the container arrives?
The delivery requires clear overhead access along the approach and at the drop point, including overhead wires, tree branches, and overhangs. The surface should be solid enough to support the container weight. If the ground is soft, gravel, or grass, placing boards or plywood under the contact points distributes the load and reduces surface damage. Walk the spot before delivery day and flag anything that looks close to the overhead clearance path.
What happens if I go over the weight allowance?
Going over the included weight allowance triggers an overage charge based on the actual weight recorded at the transfer station. Heavy material like concrete, roofing shingles, and dirt adds up faster than most people expect. Confirming the weight allowance for your debris type before loading is worth doing. If the job involves a mix of light and heavy material, we can help you think through whether the standard container or the lowboy is the better fit.
Flexible Scheduling and Rental Periods
Rental periods are flexible, and extensions are available when the job runs long. We work with the schedule rather than against it.
How do flexible delivery windows work?
Delivery windows depend on what is already on the schedule for the Fort Pierce area. Calling with a clear picture of the job, the address, the container size, and a preferred window gives the best chance of getting an early slot. Short-notice requests are taken when the schedule has room. The more flexibility you have on the exact window, the easier it is to fit the placement in quickly.
How does the swap-out and haul-away process work for larger jobs?
For jobs that generate more debris than one container can hold, a swap-out means the full container is picked up and replaced with an empty one so work can continue without a pause. The timing of the swap is coordinated on the call. For ongoing construction sites or multi-phase jobs in the area, we work out the rotation schedule so the site is never waiting on an empty container.
Call (772) 297-9956 and describe the job, and we will confirm the right size, the rental period, and the price before anything is scheduled.
(772) 297-9956